Rust-Oleum Industrial Brands
     Color Selector
ColorsClick to toggle help

Blacks (0 / 131)
Blues (0 / 127)
Browns (0 / 108)
Grays (0 / 293)
Greens (0 / 109)
Neutrals (0 / 8)
Oranges (0 / 59)
Pinks (0 / 4)
Purples (0 / 5)
Reds (0 / 137)
Whites (0 / 234)
Yellows (0 / 128)
ApplicationClick to toggle help

Aerosol (0 / 174) Applied by aerosol can.
Brush On (0 / 978) Gallon size or larger. Applies by brush, roller and/or spray gun.
Floor Coating (0 / 191) Coatings specifically designed for floors.
AttributesClick to toggle help

Acrylic (0 / 100) For mild to moderate industrial environments. Water-based with low odor and soap and water clean up. A good geneneral maintenance coating that provides excellent color and gloss retention. Surface must be free of oil and grease.
Alkyd (0 / 94) For mild to moderate industrial environments. Easy to use and versatile for a variety of applications. An excellent general maintenance coating. Not for use on galvanized steel or concrete surfaces.
Anti-Slip (0 / 12) Floor coatings that have a profile that helps prevent against slips and falls.
Epoxy (0 / 59) For severe industrial environments. A two part system of base and activator. Provides excellent chemical, abrasion and corrosion resistance. Suitable for water immersion. Epoxy coatings have poor outdoor color and gloss retention but it does not affect the performance of the coating.
General Maintenance (0 / 159)
Marking (0 / 56) Inverted marking paint for construction, locating, and landscape markings.
One Component (0 / 209) Premixed, ready to use coatings.
Rust Preventative (0 / 229)
Solvent Based (0 / 147)
Striping (0 / 22) Inverted striping paints for use with line striping machines or striping wands.
Two Component (0 / 64)
Urethane (0 / 21)
Water Based (0 / 132)
Zero VOC (0 / 37) Coatings with zero volatile organic compounds. Compliant nationwide.

There are no matches to that selection criteria. Please try again